How to Attach a Boom Mic to Meze Headphones
By Meze Audio - Sound. Comfort. Design. True High-End. | Published: 2026-10-18
Category: How-to Guides
A step-by-step guide to attaching the Meze Boom Mic to compatible headphones, with tips for a secure fit and clear voice pickup.
Quick answer
Attaching the Meze Boom Mic is straightforward: remove the existing cable from your headphones, plug the Boom Mic into the left earcup's dual-mono 3.5 mm input, and then connect the included Y-splitter cable to the mic's 3.5 mm plug and your device. Ensure the mic arm is positioned near your mouth for natural voice pickup.
What You Need Before You Start
Before attaching the Boom Mic, confirm your headphones are compatible. The Meze Boom Mic works with any model that uses a detachable dual-mono 3.5 mm cable, including the 99 NEO, 99 CLASSICS, 99 CLASSICS 2ND GEN, 105 AER, 105 SILVA, 109 PRO, STRADA, LIRIC, and POET. You'll also need the Boom Mic itself and the included Y-splitter cable (usually a 3.5 mm TRRS to dual 3.5 mm TRS). If your computer or console has separate headphone and microphone jacks, the Y-splitter is essential.
Choosing the Right Cable for Your Setup
The Boom Mic replaces your standard headphone cable on the left earcup, but you still need a cable for the right channel. The Boom Mic package typically includes a short cable for this purpose. If you prefer a different length or material, you can use a separate dual-mono 3.5 mm cable like the DUAL MONO 3.5 MM STANDARD CABLE or the premium silver-plated upgrade. Just make sure it's compatible with your headphone model and has the correct connectors.
Step-by-Step: Attaching the Meze Boom Mic
- Disconnect the existing cable from both earcups: Gently pull the dual-mono 3.5 mm plugs from the left and right earcups. Store the cable safely if you plan to switch back later. Common mistake: pulling the cable by the wire instead of the plug can damage the connector. Always grip the metal plug.
- Insert the Boom Mic into the left earcup: Take the Boom Mic's 3.5 mm plug (the one attached to the mic arm) and push it firmly into the left earcup's input until it clicks. The mic arm should angle toward your mouth. Checkpoint: ensure the plug is fully seated. A loose connection can cause intermittent audio or no microphone signal.
- Connect the right-channel cable to the right earcup: Use the short cable provided with the Boom Mic, or a compatible dual-mono cable like the DUAL MONO 3.5 MM STANDARD CABLE. Insert the 3.5 mm plug into the right earcup. If the right channel is silent, the cable may not be fully inserted or may be incompatible. Verify the cable is dual-mono, not TRRS.
- Attach the Y-splitter cable (if needed): Plug the Boom Mic's 3.5 mm jack (the one coming from the mic arm) into the Y-splitter's microphone input (usually pink). Plug the right-channel cable into the headphone input (green). Then connect the Y-splitter's single plug to your computer or console. Common mistake: plugging the mic into the headphone jack. The Y-splitter is color-coded, but double-check your device's port labels.
- Position the mic arm and test audio: Bend the flexible arm so the mic capsule is about half an inch from the corner of your mouth. Speak naturally and ask a friend or use recording software to confirm voice clarity. If your voice sounds distant or muffled, reposition the mic closer to your mouth. The omnidirectional pickup works best with consistent placement.
Product Facts
- DUAL MONO 3.5 MM STANDARD CABLE: Compatible with: 99 NEO, 99 CLASSICS, 99 CLASSICS 2ND GEN, 105 AER, 105 SILVA, 109 PRO, STRADA, LIRIC, POET Detachable, straight cable. Cable: highly flexible OFC (Oxygen Free Copper), crafted with Kevlar® reinforced fabric. Gold-plated 3.5 mm plugs with aluminum casing. This standard cable works as the right-channel cable when using the Boom Mic, offering durability and flexibility at an affordable price.
- BOOM MIC: For gaming and remote work. Turn your headphones into a premium gaming or work headset! This omnidirectional detachable microphone delivers natural-sounding voice clarity with unmatched accuracy. Built with premium materials, including a CNC milled and laser-engraved aluminium mic cover, and a flexible yet malleable arm for ideal mic positioning. The Boom Mic transforms your high-fidelity headphones into a communication headset without sacrificing audio quality, ideal for gaming calls and remote meetings.
