Back to Blog
How-to Guides 2026-11-16 Meze Audio - Sound. Comfort. Design. True High-End. 0 views

LIRIC Headband Kit: What's Included and How It Fits

LIRIC Headband Kit: What's Included and How It Fits

The LIRIC Headband Kit ships with a leather headband, steel spring band and six Torx screws. See what each part does and how the pieces fit together.

Start with the parts you actually receive

The LIRIC Headband Kit is a complete replacement set for the headband on Meze Audio Liric headphones. It contains three components: one leather headband with the Liric logo engraved, one steel spring band, and six M2 x 10mm T6 Torx screws.

That parts list matters because the kit is not just a padded cover. The steel spring band is the structural arc that gives the headband its shape and tension, and the six screws are the fasteners that hold the assembly together. Knowing what is in the box helps you confirm you have everything before you begin.

What the LIRIC Headband Kit contains

  • LIRIC HEADBAND KIT: The kit includes 1 leather headband with Liric engraving, 1 steel spring band, and 6 M2 x 10mm T6 Torx screws. This is the full contents list, so you can check that all three part types are present before fitting.
    LIRIC HEADBAND KIT
    LIRIC HEADBAND KIT
  • LIRIC HEADBAND KIT: The leather headband features padded cushions placed symmetrically in a '+' shape to allow proper air flow and lower heat and humidity buildup. The cushion layout is part of how the headband is designed to sit on your head, so it is worth noting when you position the leather band.

How the leather band and steel spring work together

The leather headband is the part that touches your head. Its padded cushions are arranged symmetrically in a '+' shape. Meze Audio states that this layout allows proper air flow and helps lower heat and humidity buildup. That is a design description rather than a fitting instruction, but it explains why the cushion pattern looks the way it does.

The steel spring band sits inside or alongside the leather band as the structural element. The supplied information does not describe the exact assembly order or the tools needed beyond the T6 Torx screws, so treat the spring band as a component to be handled carefully and kept with the leather band until you are ready to fit both.

A sensible order for the fitting job

The catalog does not include a step-by-step installation procedure. The following order is a practical way to organize the work based on the parts supplied, not a manufacturer instruction. If you are unsure at any point, stop and seek guidance from Meze Audio or a qualified technician.

  1. Lay out all parts and count the screws: You should have one leather headband, one steel spring band and six M2 x 10mm T6 Torx screws. Confirm the count before you start so you are not hunting for a missing screw mid-job.
  2. Have a T6 Torx driver ready: The screws are specified as T6 Torx. The supplied information names the screw type but does not list tools, so check that your driver fits the screw heads properly before applying force.
  3. Work on a clean, uncluttered surface: Small screws are easy to lose. A tray or a magnetic mat keeps the six screws together and stops them rolling onto the floor.
  4. Keep the leather band and spring band paired: Because the kit supplies both, fit them as a set. The supplied information does not describe separating or reusing an old spring band, so avoid mixing old and new structural parts unless you have confirmed that is appropriate.
  5. Check the fit before tightening fully: Once the screws are started, confirm the leather band sits evenly and the '+' cushion pattern is centered. The catalog does not give a torque specification, so tighten gradually and evenly rather than forcing any single screw.

What the supplied information does not cover

The catalog confirms the contents, the leather material, the engraving and the cushion layout. It does not include a fitting guide, a torque value, a list of required tools beyond the screw type, or care instructions for the leather. It also does not state compatibility with any headphone model other than the Liric, so do not assume the kit fits other Meze headphones.

That absence is a limit of the supplied information, not a sign that the kit is incomplete. If you need a definitive installation procedure or leather care advice, ask Meze Audio directly rather than guessing.

When the kit is the right purchase

  • Your Liric headband is worn or damaged: The kit gives you a new leather headband, a new steel spring band and fresh screws in one purchase, so you are not reusing tired fasteners.
  • You want the engraved Liric look: The leather band carries the Liric logo engraving, matching the original design rather than a plain substitute.
  • You already have the right Torx driver: The kit supplies T6 Torx screws but not tools. If you do not have a T6 driver, factor that into your decision before ordering.
  • You own a different Meze model: The supplied information names the Liric only. For other models, check the correct spare part rather than assuming this kit will fit.

Related Articles

Customer Service
Home
Products
Cart
Profile